Porto Wordpress Theme

Wireless systems

  • SXT SA5

    5.00 out of 5

    SXTG-5HPnD-SAr2 is a low cost, high speed 5GHz outdoor wireless sector access point. It has a 90 degree antenna to provide a wider coverage than our previous SXT units.

    Complete with a ready to mount enclosure and built-in 14dBi antenna, the package contains everything you need to set it up in a matter of minutes. The inside of the case is covered in special shielding to improve operation in high interference areas and antenna front to back ratio.

    Box contains: SXT wireless device with integrated antenna, pole mounting bracket, mounting ring, PoE injector, power adapter, quick setup guide

    – RBSXTG-5HPnD-SAr2-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

    – RBSXTG-5HPnD-SAr2 (International) supports 5150MHz-5875MHz range.

  • Metal 2

    5.00 out of 5

    The new, completely waterproof, rugged, and super high powered RouterBOARD Metal. The serious outdoor wireless device. Now in 2.4Ghz with amazing 1600mW TX power!

    Fully sealed, industrial design metal case, powered by RouterBOARD and RouterOS. 1.6 WATT of output power – to reach the last mile, in any conditions. It comes with L4 license, so you can attach your favorite antennna to use it as an AP, to make wireless point-to-point links or as a CPE- whatever you prefer! Works in the 2GHz frequency (2192-2732MHz depending on country regulations)

    It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align.

    Package contains Metal-2SHPn, mounting loops, PoE injector, power adapter and 6dBi omni antenna

  • Metal 5

    5.00 out of 5

    The new, completely waterproof, rugged, and super high powered RouterBOARD Metal. The serious outdoor wireless device!

    Fully sealed, industrial design metal case, powered by RouterBOARD and RouterOS. 1300mW of output power – to reach the last mile, in any conditions! It comes with L4 license, so you can attach your favorite 5Ghz antennna to use it as an AP, to make wireless point-to-point links or as a CPE- whatever you prefer!

    It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align.

    Package contains Metal-5SHPn, mounting loops, PoE injector, power adapter

    – RBMetal5SHPn-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

    – RBMetal5SHPn (International) supports 5150MHz-5875MHz range.

  • OmniTIK 5 PoE

    5.00 out of 5

    OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas – the perfect companion for our SXT, or for any other 5GHz 802.11a/n standard device. Weatherproof, durable and ready to use. It has ve 10/100 Ethernet ports, PoE support and a built-in 1000mW 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput.

    LED signal indicators on it’s back are fully customizable, show Ethernet activity or wireless signal – or any other information from RouterOS. The USB port gives the ability to connect a 3G modem or a storage drive.

    The OmniTIK UPA also features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters to worry about.

    Box contains OmniTik UPA-5HnD, mounting loops, PoE injector, 24v 2.5A power adapter

    – RBOmniTikUPA-5HnD-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

    – RBOmniTikUPA-5HnD (International) supports 5150MHz-5875MHz range.

  • SXT HG5

    5.00 out of 5

    SXTG HG is a High Gain, High Power wireless device designed and manufactured by MikroTik. The wireless output power for this device is up to 30dBm (1000 mW!).

    It is equipped with 5GHz 17dBi 24 degree antenna, Gigabit Ethernet port and RouterOS L4 license (can be used as AP, Backbone or CPE).

    It is powered by our new generation AR9344 CPU, which makes it even more powerful, to ensure you get the maximum throughtput.

    Unit comes complete with SXT, PoE injector, power supply and mounting kit.

    – RBSXTG-5HPnD-HGr2-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

    – RBSXTG-5HPnD-HGr2 (International) supports 5150MHz-5875MHz range.

  • BaseBox 2

    5.00 out of 5

    The BaseBox2 is an outdoor 2.4Ghz wireless device, based on our popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual band device, or a 3G/4G modem.

    The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door.

    Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit.

  • BaseBox 5

    5.00 out of 5

    The RB912 in an outdoor enclosure, fit with two RPSMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the RB912 miniPCIe slot for one more wireless interface to make a dual band device.

    The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door.

    Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector
    and power supply unit.

    Box contains: RB912 outdoor unit, PSU, PoE injector, mounting loop, DIN rail mount

    – RB912UAG-5HPnD-OUT-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

    – RB912UAG-5HPnD-OUT (International) supports 5150MHz-5875MHz range.

  • SXT 5

    5.00 out of 5

    SXT 5 is a low cost, high transmit power 5GHz outdoor wireless device. Up to 1250mW transmit power! SXT 5 can be used for point to point links or as a CPE for point to multipoint installations.

    Complete with a ready to mount enclosure and built-in 16dBi antenna, the package contains everything you need to make a point to point link, or connect to an AP.

    Box contains: one SXT 5, PoE injector, 24V power adapter, mounting bracket, metallic mounting loop.

  • OmniTIK 5

    5.00 out of 5

    OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas – the perfect companion for our SXT, or for any other 802.11 standard device.

    Weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 1000mW 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput.

    LED signal indicators on it’s back are fully customizable, show Ethernet activity or wireless signal – or any other information from RouterOS. The USB port gives the ability to connect a 3G modem or a storage drive. The OmniTIK runs RouterOS with all it’s features

    Box contains: OmniTik U-5HnD, mounting loops, PoE injector, power adapter

    – RBOmniTikU-5HnD-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

    – RBOmniTikU-5HnD (International) supports 5150MHz-5875MHz range.

  • LHG XL HP5

    5.00 out of 5

    The LHG XL HP5 is a 5GHz 802.11 a/n wireless device with an integrated dual polarization 27 dBi grid antenna and 630mW TX output power, designed to reach up to 40km in point-to-point setups at full speed.

    The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.

    We have two versions available.

    LHG XL HP5-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

    LHG XL HP5 (International) supports 5150MHz-5875MHz range.

  • Groove 52 ac

    5.00 out of 5

    Our smallest outdoor series model – a fully featured wireless RouterBOARD powered by RouterOS.

    Weatherproof, durable and ready to use. Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4GHz or 5GHz, up to 80 MHz wide channel). The new Gigabit port will help you utilise the full benefit of 802.11ac high speed wireless.

    We have two versions available.

    – RBGrooveG-52HPacn-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

    – RBGrooveG-52HPacn (International) supports 2412-2484MHz and 5150MHz-5875MHz range.

  • GrooveA 52

    5.00 out of 5

    Our smallest outdoor series model – a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built in wireless radio. It has software selectable 2 or 5GHz wireless mode, and high 500mW output power! GrooveA has also supports AP mode.

    With the Nv2 TDMA technology, up to 125Mbit aggregate throughput is possible! It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align.

    NEW- now comes packaged with a Omni directional antenna (6dBi 2.4GHz, 8dBi 5GHz)!

    Box contains: Groove unit, mounting loops, PoE injector, power adapter, Omni directional antenna (6dBi 2.4GHz, 8dBi 5GHz).

    We have two versions available.

    – RBGrooveA-52HPn-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

    – RBGrooveA-52HPn (International) supports 2412-2484MHz and 5150MHz-5875MHz range.