- Reviews (1)
2.4Ghz Dipole5.00 out of 5
Now we offer 2.4Ghz 5dBi Dipole antennas with RPSMA connectors! Take BaseBox2 and simply attach two of those antennas on connectors of BaseBox2 to have 2×2 MIMO 2.4Ghz AP! By this you can have “2.4Ghz OmniTik”, ideal for Outdoor Campus areas, for example, campings or trailer parks. Antennas are waterproof, so you can use BaseBox without top cover if both antennas are properly attached.
Flex-guide5.00 out of 5
A super low loss 50cm long RPSMA cable for superior connection quality, suited for indoor and outdoor use, this cable provides superior matching and loss values.
The name of this cable comes from combining the words “flexible” and “waveguide”, to denote the high end features of this product.
The inner conductor is silver plated copper, and both connectors are soldered, not crimped, for the best possible signal quality. Ideally suited for our BaseBox and other products with RPSMA connectors, and works with most antennas.
5.00 out of 5
The quickMOUNT pro LHG is a advanced wall or pole mount adapter for our new LHG antennas.
The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro
it is possible to perfectly set antenna alignment using integrated graduated scale.
RB2011 mount5.00 out of 5
The RB2011 wall mount kit (product code RBWMK) secures your RB2011 installation by protecting the cables from unplugging, ideal for public installations such as shared server rooms, attics, accessible closets and cabinets. Fits all standard RB2011 indoor cases (models RB2011L-IN, RB2011LS-IN, RB2011UAS-IN and RB2011UAS-2HnD-IN), protects all ten Ethernet ports, SFP port and Serial port.
Note: only fits self crimped Ethernet cables; rubber feet must be removed from the router before fitting into the mount.
RBPOE5.00 out of 5
Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower, and in other situations.
For using with RouterBOARDS that support 10-28V PoE powering, input needs to be at least 18V to accomodate any losses in cables.