5V power injector for USB (RB/411UAHR and RB/493G). IMPORTANT! 5VUSB is just injector cable, 5V power supplies must be sourced locally- we do not sell those.
Accepts DC Plug, 1.1MM x 3.5MM.
- Reviews (1)
quickMOUNT extra5.00 out of 5
The quickMOUNT extra is a advanced wall mount adapter for large point to point and sector antennas.
You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT extra gives possibility to turn antenna within 190°.
With the quickMOUNT extra is compatible with our long range heavy antennas like 30dBi parabolic dish mANT 30 or 19dBi sector mANT 19s.
48 to 24V Gigabit PoE Converter5.00 out of 5
This device lets you use any 48V PoE source (including Passive PoE, Telecom PoE, 802.3af and 802.3at) to power RouterBOARD devices.
Simply plug any 48V PoE powered ethernet cable into one port, and any 8-30V capable RouterBOARD device into the other. This device is capable to provide high power output – up to 24W (up to 1A at 24V).
You can power it with virtually any 42-57V PoE solutions available on market today (Passive, Telecom, 802.3af and 802.3at PoE plus supported)
The device is a rugged metallic design, with high quality components and integrated heatsink design. The case also has mounting holes so you can attach it to a wall.
Ethernet shield pins are inside the Ethernet connectors, so that shielded ethernet can be used, to ground either at the converter itself, or at the devices at both ends. Supports 10/100/1000Mbps Ethernet.
Note: In case if 803.3af compilant PSE is used, total output power should not exceed 12.95w (limited by the 803.3af standard).
Flex-guide5.00 out of 5
A super low loss 50cm long RPSMA cable for superior connection quality, suited for indoor and outdoor use, this cable provides superior matching and loss values.
The name of this cable comes from combining the words “flexible” and “waveguide”, to denote the high end features of this product.
The inner conductor is silver plated copper, and both connectors are soldered, not crimped, for the best possible signal quality. Ideally suited for our BaseBox and other products with RPSMA connectors, and works with most antennas.
RB2011 mount5.00 out of 5
The RB2011 wall mount kit (product code RBWMK) secures your RB2011 installation by protecting the cables from unplugging, ideal for public installations such as shared server rooms, attics, accessible closets and cabinets. Fits all standard RB2011 indoor cases (models RB2011L-IN, RB2011LS-IN, RB2011UAS-IN and RB2011UAS-2HnD-IN), protects all ten Ethernet ports, SFP port and Serial port.
Note: only fits self crimped Ethernet cables; rubber feet must be removed from the router before fitting into the mount.
ACMMCX5.00 out of 5
MMCX-Nfemale pigtail cable for adding external antennas. Total length including connectors is 385mm.