Porto Wordpress Theme

Products

CCR1036-8G-2S+EM

Our fastest router has now become even better – the new CCR1036-8G-2S+ now has two SFP+ ports for 10G interface support (SFP+ module available separately). It uses the same 36 core Tilera CPU as our other CCR1036 model, and delivers the same performance, but now, ten gigabit links are possible.

The device comes in a 1U rackmount case, has two SFP+ ports, eight Gigabit ethernet ports, a serial console cable and a USB port.

The CCR1036-8G-2S+ has two SODIMM slots, by default it is shipped with 4GB of RAM, but has no memory limit in RouterOS (will accept and utilize 16GB or more). Also available now, the EM model with 16GB of RAM!
Supports both SFP (1.25G) and SFP+ (10G) modules

  • Description
  • Reviews (1)
  • Ethernet test results

Description

Product specifications

Details
Product code CCR1036-8G-2S+EM
10/100/1000 Ethernet ports 8
Architecture TILE
CPU TLR4-03680CG-12CE-A3b
CPU core count 36
CPU nominal frequency 1.2 GHz
CPU temperature monitor Yes
Current Monitor Yes
Dimensions 355x145x44mm
License level 6
Memory Cards 1
Memory card type microSD
Number of USB ports 1
Operating System RouterOS
PCB temperature monitor Yes
Power Jack 1
SFP DDMI Yes
SFP+ ports 2
Serial port RS232
Size of RAM 16 GB
Storage size 1 GB
Storage type NAND
Supported input voltage 18 V – 28 V
Tested ambient temperature -20C .. +60C
USB slot type microUSB type AB
Voltage Monitor Yes
Suggested price

1 review for CCR1036-8G-2S+EM

  1. 5 out of 5

    good


Add a review

CCR1036-8G-2S+EM Tile 36 core max possible throughput test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 2275.7 27636.1 6578.9 26947.2 41666.7 21333.4
Bridging 25 bridge filter rules 2275.7 27636.1 5179.7 21216.1 5163.5 2643.7
Routing none (fast path) 2275.7 27636.1 6578.9 26947.2 41666.7 21333.4
Routing 25 simple queues 2275.7 27636.1 6553.3 26842.3 7643.1 3913.3
Routing 25 ip filter rules 1825.7 22171.3 3033.9 12426.9 3049.7 1561.4
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results