Porto Wordpress Theme

hAP ac lite tower

The hAP ac lite is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4GHz and 5GHz frequencies at the same time.

Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5), dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11ac 5GHz wireless, USB port for 3G/4G modem and a RouterOS L4 license.

New design universal case allows unit to be positioned either horizontally (desktop) or vertically (tower case). Wall anchored mounting kit is provided.

We have two versions available – RB952Ui-5ac2nD-TC (International) and RB952Ui-5ac2nD-TC-US (USA). RB952Ui-5ac2nD-TC-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. RB952Ui-5ac2nD-TC (International) supports 2412-2484MHz and 5150MHz – 5875MHz range.

  • Description
  • Reviews (1)
  • Ethernet test results

Description

Product specifications

Details
Product code RB952Ui-5ac2nD-TC
10/100 Ethernet ports 5
802.11a Yes
Antenna gain 2 no
CPU QCA9531
CPU core count 1
CPU nominal frequency 650 MHz
Dimensions 34 x 119 x 98mm
License level 4
Max Power consumption 8W
Number of USB ports 1
Number of chains 1
Operating System RouterOS
PoE in Passive PoE
PoE out Passive PoE
PoE-out ports Ether5
Power Jack 1
Size of RAM 64 MB
Storage size 16 MB
Storage type FLASH
Supported input voltage 10 V – 30 V
USB Power Reset Yes
USB slot type USB type A
Wireless chip model QCA-9887
Wireless secondary chip model QCA9531
Wireless secondary standards 802.11b/g/n
Wireless standards 802.11a
Suggested price

1 review for hAP ac lite tower

  1. 5 out of 5

    good


Add a review

RB952Ui-5ac2nD-TC QCA9531 (650Mhz) 100M all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 40.6 493.0 117.4 480.9 217.0 111.1
Bridging 25 bridge filter rules 40.6 493.0 70.1 287.1 70.9 36.3
Routing none (fast path) 40.6 493.0 117.4 480.9 200.8 102.8
Routing 25 simple queues 40.6 493.0 79.6 326.0 90.8 46.5
Routing 25 ip filter rules 40.6 493.0 42.2 172.8 43.2 22.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results