Porto Wordpress Theme

OmniTIK 5

OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas – the perfect companion for our SXT, or for any other 802.11 standard device.

Weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 1000mW 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput.

LED signal indicators on it’s back are fully customizable, show Ethernet activity or wireless signal – or any other information from RouterOS. The USB port gives the ability to connect a 3G modem or a storage drive. The OmniTIK runs RouterOS with all it’s features

Box contains: OmniTik U-5HnD, mounting loops, PoE injector, power adapter

– RBOmniTikU-5HnD-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

– RBOmniTikU-5HnD (International) supports 5150MHz-5875MHz range.

  • Description
  • Reviews (1)
  • Ethernet test results

Description

Product specifications

Details
Product code RBOmniTikU-5HnDr2
10/100 Ethernet ports 5
802.11a Yes
802.11n Yes
Antenna gain 7.5
Architecture MIPS-BE
CPU AR9344
CPU core count 1
CPU nominal frequency 600 MHz
Dimensions 368x125x55mm
License level 4
Max Power consumption 11W
Number of USB ports 1
Number of chains 2
Operating System RouterOS v5 and above
PoE in Yes
Size of RAM 64 MB
Storage size 16 MB
Storage type FLASH
Supported input voltage 11 V – 30 V
Tested ambient temperature -30 .. +70C
USB Power Reset Yes
USB slot type USB type A
Wireless chip model AR9344
Wireless standards 802.11a/n
Suggested price

1 review for OmniTIK 5

  1. 5 out of 5

    Good


Add a review

RBOmniTikU-5HnDr2 AR9344 100M all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 40.0 485.8 116.5 477.2 269.6 138.0
Bridging 25 bridge filter rules 40.0 485.8 86.0 352.3 87.6 44.9
Routing none (fast path) 40.0 485.8 116.5 477.2 226.9 116.2
Routing 25 simple queues 40.0 485.8 103.9 425.6 106.6 54.6
Routing 25 ip filter rules 40.0 485.8 59.6 244.1 60.5 31.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results