Porto Wordpress Theme

QRT 2

The QRT-2 is rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 17dBi antenna and a super high power 2Ghz wireless transmitter.

Inside is a new dual chain wireless device, with high performance, high output power wireless transmitter, and a Gigabit Ethernet port, to fully utilize the benefit of 802.11n high speed wireless.

Easy to use and quick to deploy, QRT is ideal for point-to-point links.

  • Description
  • Reviews (1)
  • Ethernet test results

Description

Product specifications

Details
Product code RBQRTG-2SHPnDr2
10/100/1000 Ethernet ports 1
802.11b Yes
802.11g Yes
802.11n Yes
Antenna gain 17
CPU AR9342
CPU core count 1
CPU nominal frequency 600 MHz
Dimensions 309x230x50mm
License level 4
Max Power consumption 11W
Number of chains 2
Operating System RouterOS
PCB temperature monitor Yes
PoE in Yes
Size of RAM 64 MB
Storage size 16 MB
Storage type FLASH
Supported input voltage 13 V – 30 V
Tested ambient temperature -40C to +70C
Voltage Monitor Yes
Wireless chip model AR9342
Wireless standards 802.11b/g/n
Suggested price

1 review for QRT 2

  1. 5 out of 5

    Good


Add a review

RBQRTG-2SHPnDr2 AR9342 1G 1 port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 81.0 983.7 232.0 950.3 269.6 138.0
Bridging 25 bridge filter rules 81.0 983.7 86.0 352.3 87.6 44.9
Routing none (fast path) 81.0 983.7 210.0 860.2 226.9 116.2
Routing 25 simple queues 81.0 983.7 103.9 425.6 106.6 54.6
Routing 25 ip filter rules 56.8 689.8 59.6 244.1 60.5 31.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results