Porto Wordpress Theme

SXT SA5

SXTG-5HPnD-SAr2 is a low cost, high speed 5GHz outdoor wireless sector access point. It has a 90 degree antenna to provide a wider coverage than our previous SXT units.

Complete with a ready to mount enclosure and built-in 14dBi antenna, the package contains everything you need to set it up in a matter of minutes. The inside of the case is covered in special shielding to improve operation in high interference areas and antenna front to back ratio.

Box contains: SXT wireless device with integrated antenna, pole mounting bracket, mounting ring, PoE injector, power adapter, quick setup guide

– RBSXTG-5HPnD-SAr2-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

– RBSXTG-5HPnD-SAr2 (International) supports 5150MHz-5875MHz range.

  • Description
  • Reviews (1)
  • Ethernet test results

Description

Product specifications

Details
Product code RBSXTG-5HPnD-SAr2
10/100/1000 Ethernet ports 1
802.11a Yes
802.11n Yes
Antenna gain 14
CPU AR9344
CPU core count 1
CPU nominal frequency 600 MHz
Dimensions 140x140x56mm
License level 4
Max Power consumption Up to 7W
Number of USB ports 1
Number of chains 2
Operating System RouterOS
PCB temperature monitor Yes
PoE in Yes
Size of RAM 64 MB
Storage size 128 MB
Storage type NAND
Supported input voltage 6 V – 30 V
Tested ambient temperature -30C .. +80C
USB Power Reset Yes
USB slot type USB type A
Voltage Monitor Yes
Wireless chip model AR9344
Wireless standards 802.11a/n
Suggested price

1 review for SXT SA5

  1. 5 out of 5

    Good


Add a review

RBSXTG-5HPnD-SAr2 AR9344 1G 1 port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 81.0 983.7 232.0 950.3 269.6 138.0
Bridging 25 bridge filter rules 81.0 983.7 86.0 352.3 87.6 44.9
Routing none (fast path) 81.0 983.7 210.0 860.2 226.9 116.2
Routing 25 simple queues 81.0 983.7 103.9 425.6 106.6 54.6
Routing 25 ip filter rules 56.8 689.8 59.6 244.1 60.5 31.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results