ACSWI
2.4-5.8GHz Swivel Antenna with cable and U.fl connector. Approximately 4dBi gain
- Description
- Reviews (1)
Description
Product specifications
| Details | |
|---|---|
| Product code | ACSWI |
| Connector | uFL |
| Suggested price | |
1 review for ACSWI
Add a review
Related Products
-
hEX PoE
hEX PoE is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a USB 2.0 port and a SFP port for adding optical fiber connectivity. The ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
It is affordable, small and easy to use, but at the same time comes with a very powerful 800MHz CPU, capable of all the advanced configurations that RouterOS supports. Less power adapters and cables to worry about! Max current is 1A per port, Ethernet ports are shielded.
It also supports passive or standard 802.3af/at PoE input/output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! It can power at/af mode B (4,5+)(7,8-) compatible devices, if 48-57 input voltage is used.
-
MMCX-RPSMA pigtail
MMCX to RPSMA pigtail,for adding second wireless interface to BaseBox2 or BaseBox5
Length of cable 260mm
-
48 to 24V Gigabit PoE Converter
This device lets you use any 48V PoE source (including Passive PoE, Telecom PoE, 802.3af and 802.3at) to power RouterBOARD devices.
Simply plug any 48V PoE powered ethernet cable into one port, and any 8-30V capable RouterBOARD device into the other. This device is capable to provide high power output – up to 24W (up to 1A at 24V).
You can power it with virtually any 42-57V PoE solutions available on market today (Passive, Telecom, 802.3af and 802.3at PoE plus supported)
The device is a rugged metallic design, with high quality components and integrated heatsink design. The case also has mounting holes so you can attach it to a wall.
Ethernet shield pins are inside the Ethernet connectors, so that shielded ethernet can be used, to ground either at the converter itself, or at the devices at both ends. Supports 10/100/1000Mbps Ethernet.
Note: In case if 803.3af compilant PSE is used, total output power should not exceed 12.95w (limited by the 803.3af standard).
-
ACSWIM
2.4-5.8GHz Swivel Antenna with cable and MMCX connector.
-
quickMOUNT
The quickMOUNT is a basic wall mount adapter for small point to point and sector antennas.
You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT gives possibility to turn antenna within 190°.
With the quickMOUNT it is possible to simultaneously mount two SXTs, thus creating a repeater access point or creating large sector coverage.
admin –
good