Metal 9
RBMetal9HPn is our first product for 900MHz frequency. With the same case as our Metal2 and Metal5 models, it’s completely waterproof, rugged and high powered. RBMetal9HPn is equipped with RouterOS L4 license (AP, point-to-point or CPE).
Metal9HPn is compatible only with another Metal9HPn, and available only with US type power plug. It will not work with any other 900MHz manufacturer product.
Supported frequencies: 902-927MHz (Selectable center frequencies 907 to 922)
- Description
- Reviews (1)
- Ethernet test results
Description
Product specifications
| Details | |
|---|---|
| Product code | RBMetal9HPn |
| 10/100 Ethernet ports | 1 |
| 802.11b | Yes |
| 802.11g | Yes |
| 802.11n | Yes |
| 802.3af support | no |
| Architecture | MIPS-BE |
| CPU | AR7241 |
| CPU core count | 1 |
| CPU nominal frequency | 400 MHz |
| Dimensions | 177x44x44mm, 193g |
| License level | 4 |
| Number of chains | 1 |
| Operating System | RouterOS |
| PCB temperature monitor | Yes |
| PoE in | Yes |
| Size of RAM | 64 MB |
| Storage size | 128 MB |
| Storage type | NAND |
| Supported input voltage | 8 V – 30 V |
| Tested ambient temperature | -30C to +70C |
| Voltage Monitor | Yes |
| Wireless chip model | AR9283 |
| Wireless standards | 802.11b/g/n |
| Suggested price | |
1 review for Metal 9
Add a review
| RBMetal9HPn | AR7241 100M 1 port test | ||||||
| Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
| kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
| Bridging | none (fast path) | 8.1 | 98.6 | 23.5 | 96.3 | 148.0 | 75.8 |
| Bridging | 25 bridge filter rules | 8.1 | 98.6 | 23.5 | 96.3 | 53.7 | 27.5 |
| Routing | none (fast path) | 8.1 | 98.6 | 23.5 | 96.3 | 148.0 | 75.8 |
| Routing | 25 simple queues | 8.1 | 98.6 | 23.5 | 96.3 | 92.8 | 47.5 |
| Routing | 25 ip filter rules | 8.1 | 98.6 | 23.5 | 96.3 | 37.5 | 19.2 |
Related Products
-
SXT SA5
SXTG-5HPnD-SAr2 is a low cost, high speed 5GHz outdoor wireless sector access point. It has a 90 degree antenna to provide a wider coverage than our previous SXT units.
Complete with a ready to mount enclosure and built-in 14dBi antenna, the package contains everything you need to set it up in a matter of minutes. The inside of the case is covered in special shielding to improve operation in high interference areas and antenna front to back ratio.
Box contains: SXT wireless device with integrated antenna, pole mounting bracket, mounting ring, PoE injector, power adapter, quick setup guide
– RBSXTG-5HPnD-SAr2-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
– RBSXTG-5HPnD-SAr2 (International) supports 5150MHz-5875MHz range.
-
LHG XL HP5
The LHG XL HP5 is a 5GHz 802.11 a/n wireless device with an integrated dual polarization 27 dBi grid antenna and 630mW TX output power, designed to reach up to 40km in point-to-point setups at full speed.
The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.
We have two versions available.
LHG XL HP5-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
LHG XL HP5 (International) supports 5150MHz-5875MHz range.
-
GrooveA 52 ac
Our smallest outdoor series model – a fully featured wireless RouterBOARD powered by RouterOS.
Weatherproof, durable and ready to use. Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4GHz or 5GHz, up to 80 MHz wide channel). The new Gigabit port will help you utilise the full benefit of 802.11ac high speed wireless.
The Groove A (AP model) comes with Level 4 license and includes a Dual Band 2.4/5GHz Omni directional antenna (6dBi 2.4GHz, 8dBi 5GHz), so you can use the unit right out of the box, or use your own antenna.– RBGrooveGA-52HPacn-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
– RBGrooveGA-52HPacn (International) supports 2412-2484MHz and 5150MHz-5875MHz range.
-
OmniTIK 5
OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas – the perfect companion for our SXT, or for any other 802.11 standard device.
Weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 1000mW 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput.
LED signal indicators on it’s back are fully customizable, show Ethernet activity or wireless signal – or any other information from RouterOS. The USB port gives the ability to connect a 3G modem or a storage drive. The OmniTIK runs RouterOS with all it’s features
Box contains: OmniTik U-5HnD, mounting loops, PoE injector, power adapter
– RBOmniTikU-5HnD-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
– RBOmniTikU-5HnD (International) supports 5150MHz-5875MHz range.
-
SXT 6
SXT 6 is our first product for licensed 5.9-6.4GHz frequency. Equipped with RouterOS Level 4 license and 28 degree Dual Chain 16dBi antenna, unit can be used as Base Station or CPE, as well as two of them can be used to create Point-to-Point link.
IMPORTANT! Product is available for 5.9-6.4GHz license holders only, you would need to show your license to Distributor to be able to place your order. This product is NOT for unlicensed ISM bands!
admin –
Good